Home Products Commercial Lighting LED Panel Lights

LED Panel Lights

6060 led panel lights

Specifications:

6060 Square led panel lights(Edge-lit)

Rated Voltage:85-264V

Power: 36W,48W, 60W (other watts in options)

Light Source: SMD2835,SMD3014,SMD5730,SMD4014

Lighting efficiency: 90Lm/w

Color temperature: 3200K,5500K,7000K

CRI: 70/80

Power supply: Bipolar PFC without lighting strobe

Material: Aluminum, Guide plate, Diffuser, PCB, LEDs

Dimension: 595*595*10mm

Frame color: Sliver white, Black, White

Warranty: 5 years

 

6060 Square led panel lights(Edge-lit)

Rated Voltage:85-264V

Power: 36W,48W, 60W (other watts in options)

Light Source: SMD2835,SMD3014,SMD5730,SMD4014

Lighting efficiency: 90Lm/w

Color temperature: 3200K,5500K,7000K

CRI: 70/80

Power supply: Bipolar PFC without lighting strobe

Material: Aluminum, Guide plate, Diffuser, PCB, LEDs

Dimension: 595*595*10mm

Frame color: Sliver white, Black, White

Warranty: 5 years

 

Safety Notice for Using:

.Please always use the light out of its package.

.Before starting use of the light ,please check if the light was damaged during transportation.if any damage shown,please DO not install or use it.

.Any maintenance should be performed by trained professionals only.

.Keep packaging material away from the rech of children and pets.Risk of suffocation!

.Caution.The packaging contains small parts that may be swallowed by children.

.Never leave childree unattended in the vicinity of the lights and do not allow them to play with electrical devices.

.Try to avoid looking directly in the LED beam-especially for extended periods of time.Do not shine the LED light in another person’s eyes.

.under no circumstances, the luminaire shall be covered with insulating matting or similar material.

.Never allow the light to come into contact with open flames or external heat sources.

.The products need to re-repair inspection or special treatment of retirement after service time.

Maintenance:

.Prior to cleaning the light,make sure it has been disconnected form the power supply. .Use a dry or slightly moistened cloth for cleaning.

.Never use any chemicals or abrasives for cleaning.

Disposal:  Used electronic devices must be collected for recycling and cannot be deposited together with daily garbage.

Installation:

.This product should be installed by trained electricians.  .Check integrality of the products when unpack the packing.

.The distance between the  light and  any flammable materials must not be less than 0.2m.The distance between the upper part of the  installed light and the ceiling must not be less than 2cm.The light must not be installed into ceilings or walls that contain heat-insulating material.

. The main cable must not connect with the low volage cable or the surface-mounted lights.

.Guide the  lights’connecting cables through the drilled-out hole,and fix the surface-mounted lights with the pre-fitted clips.Make sure that these are securely connected to the base material.

.When laying the cables,make sure that the cables and SELV plug are not subjected to any tensile or twisting forces.Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights .Do not kink cables.Output cables should be laid separately and at adistance from other cables. After installation,connect the transformet to the mains supply.

Disposal:

Use only the LED driver included,and do not connect the surface-mounted lights to other loads.  Do not remove the name plate of lighting and LED driver. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

Notes:

Non-professinonals are not allowed to disassemble and maintain the products.We  have the right not to provide after-slae service if unauthorized disassembly and  maintenance happens to the products.

 

Evenly distributed light

Designed to easily install in T-grid drop ceiling systems

LED Driver and Light Engine accessible from below the ceiling

Uniform light distribution across the entire face of the luminaire with no hotspots or banding

Areas of application

 

T-Grid Ceiling Applications

Office

Healthcare

Commercial

Retail

Conference rooms

Corridors

Living rooms

 

Copyright @ 2015-2019 SuperLED & HONGLANG All Right Reserved